Data Preparation for Injury Prediction - Complementary Training

Data Preparation for Injury Prediction

This topic contains 4 replies, has 3 voices, and was last updated by mm Mladen Jovanovic 3 years, 9 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • mm
    23/08/2018 at 00:46 #23570

    I have recently wrote a technical note (actually a video) for Sport Performance and Science Reports journal regarding Data Preparation for Injury Prediction. Both data and R core are available on GitHub repository.

    [See the full post at: Data Preparation for Injury Prediction]

    29/08/2018 at 14:18 #23629

    Wonderful article.
    I will try to implement this approach with me team.
    One thing: on your opinion, which will be the best solution to implement gps data if I have only 10 gps? I will use gps data only on some athlete (that are several every training) or it will be better to use average values and apply them to the whole team?

    Thank a lot again!


    04/09/2018 at 09:43 #23660

    Hi Marco,

    Glad you found it useful. Regarding only having 10 units – I think the BEST use might be to create a list of exercises/drills you do and have a certain ranges of values (e.g. HSD per min od drill, # Hard Acceleration per minute of drill, etc). You can rotate athletes to get a glimpse, as well note the position of the athletes (to also see if there are any differences).

    Having this drill database makes you more ‘precise’ in ‘predicting’ the load. This is by far not perfect, but beteer than nothing.

    As for injury prediction with only 10 units? Hmm… Having 30 unitsts, injury prediction is still pipe dream, so don’t need to worry about it. What can be done is to use the drills database to ‘estimate’ individual loads (using position and minutes played in a given drill) or as you say ‘average’ (although then you are predicting for a TEAM, not individual).

    Hope this all make some sense 🙂

    19/08/2020 at 00:28 #29355

    Hi Mladen,

    Would you be able to help me design a regression model for GPS data? I work in non league so we don’t have GPS Units and I want to predict HSR etc from SSG based on data collected in the literature. I want to be able to manipulate the pitch sizes and durations to then get a prediction of the external load on the players.

    Any help is appreciated!!!

    22/08/2020 at 09:43 #29393

    Hi Glenn,

    Might be hard to do that. But let me make sure that understood this correctly – you do not have GPS, but want to ‘predict’ HSR from SSG data? Ok, what data do you have? From literature, you can only get ‘expected’ values (i.e., mean).

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.